Wednesday, November 27, 2019

The Emerging field of nanoscale science, engineering and technology The WritePass Journal

The Emerging field of nanoscale science, engineering and technology 1.0 Introduction The Emerging field of nanoscale science, engineering and technology 1.0 Introduction1.1 History of the Focus Ion Beam (FIB) Technology1.2 Operational Overview1.3 Using Focus Ion Beam Systems 1.4 The Focus Ion Beam Instrument1.41 Ions in Operation1.42 Gallium (Ga+) Ions2.0 Focus Ion Beam System2.1  Ã‚   The Column2.2 Lens System2.3 Generation of Image2.4 Detector, Stage and Gas Injection2.5  Liquid Metal Ion Source (LMIS) 2.5  Milling2.7 Sample Preparation2.8 Imaging3.0   Conclusion Related 1.0 Introduction The Emerging field of nanoscale science, engineering and technology – that is the ability to work at the atomic, molecular and supramolecular levels, to create large structures with fundamentally new properties and functions have lead to an unrivalled understanding and control over basic building blocks of all natural and man-made things [roco]. This rapid advancement has lead to an increased demand for technological development on a nanoscale, which has brought about the birth and improvement of infrastructural changes aimed at representing and observing these features. The world wide focus over this time has been the evolution of methods including SEM (Scanning Electron Microscope), TEM (Transmission Electron Microscope), FIB (Focus Ion Beam) etcetera for the detailing of features at the nanoscale. 1.1 History of the Focus Ion Beam (FIB) Technology Focus Ion Beam (FIB) systems have been commercially produced, mostly for manufacturers of large semiconductors for about 20 years [www.fibics.com]. In 1982, Anazawa et al. produced a 35Kv Ga- source and about three years later Orloff and Sudruad proposed FIB system for implantation and lithography [sudruad], even though as of 1959, Feyman had suggested the use of ion beams [www.nanofib.com]. In 1985, Kato et al. have pointed out the advantages of the FIB technology in the fabrication of sub-micro structures. 1.2 Operational Overview The operation of the FIB are same as that of SEM (Scanning Electron Microscope), except that the focus ion beam system employs the use of focussed beam of   ions instead of beam of electrons utilised in the SEM systems[]. Commercialised nanoscience is limited by availability of tools. Using focussed ion beam system allows specified fabrication and imaging abilities which reduces greatly the characterization cycles and development required in the nano-technological field by scientist. The capabilities within focus ion beam ( FIB) are valued highly for rapid prototyping application. The deposition combination / direct etching of FIB in combination with digitally addressed patterning system allows nano prototyping engine with capabilities that will help researches in nano technology , because the operation of FIB is on both micro and nano scale, it can be used in creating the required structures. FIB has prà ©cised control over deposition and milling parameter and as such, it is the proper tool for creating small structures for nano technology in the top –down approach. It is a highly flexible, mask-less technique which is fast for serial techniques, thus allowing the FIB instrument very efficient for design modifications. Most conventional methods of sample preparation used today in life sciences are compatible with investigations by using FIB. 1.3 Using Focus Ion Beam Systems The direct applicability obtained in using FIB instrument is highly relevant in industrial applications. FIB instrument and its application have contributed immensely to industrial researches carried out in several analysis laboratories For instance in the polymer industry, metallurgy industry, nuclear research etcetera. The ability to image, mill and deposit material by using FIB instrument depends largely on the nature of the ion beam- solid interactions. Milling occurs as a result of physical sputtering of the target. In understanding the mechanism of sputtering we need to consider the interaction between an ion beam and the target. Sputtering usually takes place when there is elastic collision in series when momentum is transferred from the incident ions to the target atoms in the region of collision cascade. Ionization of a portion of the ejected atoms can be collected for mass analysis or image formation. Production of plasmons (in metals), phonons and emission of secondary el ectrons can occur as a result of inelastic scattering. Imaging in the focus ion beam is carried out by detecting the secondary ions/electrons typically, sputtering in focus ion beam processes occurs within energy ranges that are dominated by nuclear energy losses. Focus Ion beam devices are used to scan the surfaces of samples using simple focussed ion beams. The detection of secondary ions allows the processed surface of samples and microscopic images to be observed. The ion beam is generated by using liquid metal ion source (LMIS) when a beam of ion is irradiated on the surface of a specimen by finding the secondary ions with a detector a two dimensional distribution which shows the microscopic images of the surface of the specimen can be observed. 1.4 The Focus Ion Beam Instrument The Operation of the FIB technology uses a similar principle as the SEM (Scanning Electron Microscope) / TEM (Transmission Electron Microscope) but differs in the use of ions and this introduces consequences of enormous magnitude for interaction which occur at the surface of the specimen. Using Focus Ion Beam (FIB) instrument involves two major parameters – penetration of ion into material and the rate of sputtering of ion of the material. When the emitted liquid metal ion source (LMIS) primary ion beam hits the surface of the specimen, it splutters a small amount of material this will leave the specimen surface as either neutral atoms or secondary ions – Secondary beams are also produced using the primary beam. Signals from the sputtered ion or secondary electron are collected to produce an image as the primary beam raster on the specimen surface. Liquid metal ion source (LMIS) development is crucial for the development of Focus Ion Beam (FIB) [www.dspace.cam.ac.uk] , application of electric field that are very high into a steering quadrupole, octupole deflector, two electrostatic lenses in the column   to focus ions in a beam and scan the beam on the specimen. Liquid metal ions source (LMIS) generates ions; these ions are focussed on electrostatic lenses. When specimen surfaces are bombarded using ions that have been extracted from the liquid metal ion source (LMIS) this generates ions, secondary electron and sputtered material and the various generated items serve different purpose in the focus ion beam. At high primary currents a large amount of material can be removed by sputtering thus allowing precision milling of the specimen down to the submicron scale, while less material is removed at low primary beam currents. The use of ions in focus ion beam instruments means that they cannot penetrate with ease individual atoms of the specimen because ions are large. So interaction usually occurs within outer shell interaction which causes chemical band breakage of the substrate atom and atomic ionization. Inner shell electrons of the specimen cannot be reached by an incoming ion. The probability of an interaction with atoms that are within the specimen is much higher because of the large ion size and this result in rapid loss of energy of the ion. This means that the depth of penetration is much lower. It should be noted that the main advantage of   the Focus Ion beam is its ability to produce image of the sample after which it mills the sample precisely away from the areas that are selected[ ]. 1.41 Ions in Operation Ions are slower when paired to electrons for the same energy, because they are much heavier as a result Lorenz force is lower, so the use of magnetic lenses is less effective, and as such the focussed ion beam instrument is equipped with electro static lenses. Ions are positive, slow, large and heavy; so the resulting ion beam will remove atoms from the substrate and because the size, beam position and dwell time are well controlled, it can be used in the removal of materials locally in a manner that is highly controlled down to the nanoscale. As a result of the actions due to the ions used in the Focus ion beam instrument, fabrication and imaging functions are derived. The fabrication function occurs due to the sputtering while the imaging function arises due to the ions and secondary electrons. 1.42 Gallium (Ga+) Ions The gallium ions are used in the focus ion beam (FIB) instruments for the following reasons [fei]; Due to its surface potential it exhibits very high brightness, the tip sharpness, the flow properties of the gun and the gun construction which results in field emission and ionization. This is an important result for the focussed ion beam. It should be noted that whatever chosen material should be ionized before the formation of the beam and then accelerated. The element Gallium is metallic and because of its low melting temperature is a very convenient material for compact gun construction with limited heating. Gallium is the centre of the periodic table and exhibits an optimal momentum transfer capability for a wide range of materials, lithium which is a higher element will not be sufficient in milling of heavier elements. Gallium element has low analytical interference 2.0 Focus Ion Beam System In the figure below, the FEJ 200 series type F113 of the FIB system is represented. In the figure are the various components of the system which includes the column, the specimen chamber and the detector; 2.1  Ã‚   The Column This is situated above the specimen chambers. It is made up of   two electrostatic lenses, a set of beam blanking plates, liquid metal ion source (LMIS), a beam acceptance aperture, steering quadrupole, beam defining aperture and an octupole deflector. 2.2 Lens System Coming from the source, the beam goes through a beam acceptance aperture after which it goes into the first lens. Above the beam- defining aperture (BDA), the quadrapole adjust the position of the beam in a manner as to allow the beam move through the center of the beam-defining aperture (BDA). The beam is aligned to the optical axis of the second lens’ quadrapole. Beam astigmatism correction, shift and scanning is provided by the octupole which is positioned below the second lens. Between the second lens assembly and the second lenses steering quadrapole we have the beam blanking assembly. This is made up of aperture and electrical path and blanking plates. Beam blanking provides specimens with protections against constant milling. 2.3 Generation of Image The primary beam is scanned as a raster across the specimen and it is made up of lines in vertical axis (shifted slightly from one another) and lies in the horizontal (in series). With scanning of the beam over the specimen the secondary ions and the secondary electrons that are generated by the specimen are detected. Details of this information are stored in the computer and images are produced from these information. 2.4 Detector, Stage and Gas Injection Control of rotation and X and Y axis is performed by software and it can be tilted to the XY plane manually. Gases of two types are evolved above the surface of the specimen at about 100 µm of distance. One of these gases is used for platinum deposition and the other for enhanced etch. During bombardment of ion in milling, species that are charged are formed and they are attracted to the detector. A glass of millions of arrays of minute channel electron multiplier is the detector; it is a micro channel plate (MCP). 2.5  Liquid Metal Ion Source (LMIS) LMIS is made of a needle emitter which has an end radius of 1 10 µm. It is coated with high surface tension metal which at its melting point has a low vapour pressure. This emitter is subjected to heating till the melting point of the metal is attained. A positive high voltage is placed on it. Using the balance between the surface tension forces and the electrostatic the liquid metal is drawn into a conical shape. The source that is commonly used is Gallium [dspace.mit.edu]. 2.5  Milling By using the scan control system, polygons, circles and lines can be milled. The table below represents the different beam currents and their corresponding milling spot sizes. The figure below gives us the pixel size and milling spot size and the beam overlap.   The overlap can be expressed as the overlapped area where the beam moves from a position to the other. And the time where the beam remains in a position is known as the dwell time.    2.7 Sample Preparation The three main strategies used in the focus ion beam sample preparation of specimen that will be inspected using TEM are: Ex situ lift-out (EXLO) preparation (Centre Image), H-Bar sample preparation (Left image) and In Situ lift-out (INLO) preparation (Right image) [info.omniprobe.com/blog/bid] 2.8 Imaging When ion beam is scanned on the surface of the specimen, it causes ions and electrons to be ejected. After scanning through the surface of the specimen the primary Gallium ion penetrate into the surface of the specimen. The depth of the penetration varies from one material to the other. The secondary electron yield is much higher than secondary ion yield during ion milling and thus is the reason why focus ion beam is usually used in the secondary electron mode. Secondary ions and secondary electrons are obtained within regions that are closer the surface of the specimen. 3.0   Conclusion In their work on the future of focus ion beam, the ORSAYPHYSICS group has shown that field of focus ion beam is open to expansion. Their projections with regards the extent to which focus ion beam can be deployed is shown in the figure below: Fig.     Ã‚   Current and Future FIB Technologies Source: felmi-zfe.tugraz.at/FIB/WS3_Beitraege/01%20Sudraud.pdf The use of FIB has been developed extensively over the years in applications like super conductor, field emission device, accelerometer etcetera. Armed with imaging capability of high resolution as its recently upgraded technologies, the focus ion beam (FIB) instrument is indeed technology that is providing solutions to problems that has been previously unresolved. This heralds the focus ion beam (FIB) instrument as an important device for the future in the nano science, technology and engineering environment.

Saturday, November 23, 2019

What is Christian ethics Research Paper Example

What is Christian ethics Research Paper Example What is Christian ethics Paper What is Christian ethics Paper The term ethics deals with what is morally right or wrong. Christian ethics therefore, deals with what is morally right or wrong for a Christian. There are several distinguishing characteristics of Christian ethics, each of which play a vital role to its analysis. Some Christians will base their ethics solely on the Bible and its teachings, others will base their ethics on the biblical teachings but also on Church tradition and Natural Law, others will follow a Situation or virtue ethics approach and others will look to their conscience as a guide. Christian ethics is based on Gods will and is a form of divine command position. However, God never wills anything contrary to his unchanging moral character. The ethical imperatives that God gives are in accord with his unchangeable moral character. That is, God wills what is right in accordance with his own morals Be Holy because I am Holy. Christians believe the scriptures transmit the Word of God: this gives them authority. The weight of authority given to the Bible is dependent on what exactly a Christian believes about the books. Some Christians believe that humans were inspired by God to write down the scriptures which means the writings are related to the time and culture when they were recorded and may contain human errors. This makes them a useful source of guidance to people but does not make their contents absolute. Others believe the Bible contains Gods words handed down directly to humans. This makes these writings divine and makes them the highest authority their rules and codes are absolute. The New Testament has particular importance for Christians because it records the teachings of Jesus, whom Christians regard as Gods Son sent to earth to save humanity. They also believe it is essential to follow Jesus teachings if they are to be saved. The Divine Command theory is a strong part of Christian ethics as it poses a vital belief the argument is that something is good simply because God commands it and for no other reason. This is one side of Euthyphros dilemma and states that we cannot apply reason or verify it in any way. For example, if God were to command a cruel dishonest action such as murdering an innocent man then it would be right simply because he commanded it. Many Christian thinkers, including Aquinas and more recently William Temple, have rejected the Divine Command Theory because they say some things are innately good or bad. Temple said, In its nature, the moral judgement is quite wholly independent of religion. The Roman Catholic Church accounts for the majority of Christians in the world, and is the largest religious organisation of any religion. Within Catholic theology, Natural Law holds a dominant position. Aquinas has emphasised reason as a tool for showing that certain acts are intrinsically right or wrong, as they go against true purpose; certain absolutes, such as sanctity of life, cannot be changed by the circumstances. The Church encourages a range of different approaches, but when it comes to official church teaching, the vast majority of statements, encyclicals etc. are strongly in-line with Natural Law. Within other denominations, Natural Law theology still has a significant impact. Many Christians adopt deontological positions and think we should act according to Gods design or purpose for our lives. They may be less influenced by Aquinas in this, and Protestants tend to be less sure about moral absolutes. However, there is still a strong sense of following rules within most Christian denominations. Christians believe Natural Law is God-given and as such has authority in the formulation of an ethical code. Catholics also consider that conscience plays an important part in Christian ethical decision-making. Here conscience is not seen as some inner voice which will point us in the right direction but something of reason and judgement. Christians regard their conscience as the ultimate guide for making moral decisions because it was given to them by God and represents the voice of the Holy Spirit within them. Prayer worship and the teaching of the Church also assist the conscience, which Aquinas described as reason-making moral decisions. Very liberal Protestants may have a situationist approach to Christian ethics. Situation ethics presumes it is not necessary to abandon moral autonomy, nor is it necessary to act in an antinomianistic or legalistic way. In any situation people need to avoid subjectivism and individualism, and to use the moral rules of the community, but they should set these aside if love is better served by doing so, therefore being based on the Christian principle of agape unconditional love. Joseph Fletcher explained this theory in his book about situation ethics and it became apparent that he believed that love always takes the priority, even over laws against lying, stealing, adultery and murder. For example, this could be applied in a situation where it would be wrong to use someone for sexual pleasure as there was no love involved. Virtue ethics is also an important source for Christian ethics. Instead of focusing on acts or ends, virtue theory holds that people should think about becoming better people, and prescribes qualities which constitute goodness. So while a utilitarian seeks to bring about the end with the greatest good for the greatest number, and Aquinas encouraged people to do actions which accorded with the natural law and avoid those which didnt, virtue theorists encourage people to look to self-improvement. This links to love as being the highest of all virtues and also the rationale for all virtues but just in different circumstances. The virtues, for Christian ethics point towards the goal for which we aim, even if we do not achieve it in life. In conclusion, it is evident that Christians set out to follow the Will of God. They use various sources of authority to discover what the Will of God is and I have mentioned these different types of foundations of the religion in my essay which has proved that whilst most Christians would recognise them as sources of authority, they are likely to place a different emphasis on their relative importance.

Thursday, November 21, 2019

Education Article Summary Lab Report Example | Topics and Well Written Essays - 500 words

Education Article Summary - Lab Report Example Because current assessment methods were receiving criticism, the study finally sought to identify alternatives to the current identification methods. The conflict arose because while the IDEA prior to 2004 had identified several methods to identify the students who had learning disabilities in need of special services, there was no uniform measure by which the states were guided in assessing the severity of the disability. Accordingly, the article found, that there was a severe lack of continuity within the states. For the most part, the states had a common definition for the term SLD. Thus the resulting problem was that in addition to there not being a contiguous method of identifying SLD, the parameters that did exist were arbitrarily ignored. Moreover, it was determined that there was an unacceptable amount of time between identification of the problem and treatment plan for assistance. The author found that the majority polled found that the most favored method of identifying a learning disability was the "response-to-treatment" or "response-to-intervention". This approach begins with teaching and a level of teaching intensity is increased according to the needs of the child.

Wednesday, November 20, 2019

Bill Evans Essay Example | Topics and Well Written Essays - 1250 words

Bill Evans - Essay Example His inescapable influence on the very sound of jazz piano has touched virtually everybody of prominence in the field after him—as well as most of his contemporaries, and he remains a monumental model for jazz piano students everywhere, even inspiring a newsletter devoted solely to his music and influence. Speaking of influences, during young Evans’ life, it was Harry—his older brother—who was his first influence. Harry was the first one in the family to take piano lessons, and young Bill began at the piano by mimicking him. It was during this time that the idea of doing something in music that somebody hadnt thought of opened a whole new world to him. This idea became the central one of his musical career. Evans mother was an influence, too. She was an amateur pianist who had piles of old music sheets, which the young Bill read through. gaining breadth and above all speed at sight-reading. This enabled him to explore widely in classical literature, especially 20th century composers. He once remarked, and I quote: "Its just that Ive played such a quantity of piano. Three hours a day in childhood, about six hours a day in college, and at least six hours now. With that, I could afford to develop slowly. Everything Ive learned, Ive learned with feeling being the generating force.† He further added that playing Bach a lot helped him gain control over tone and improved his physical contact with the keyboard. Evans received a music scholarship to Southeastern Louisiana University, and graduated with a degree in piano performance and Music Education in 1950. In college, he discovered the work of Horace Silver, Bud Powell, Nat King Cole, and Lennie Tristano, who was to have a profound influence on him. Later, he took postgraduate studies in composition at the Mannes College of Music in New York, where he also mentored younger music students. As a teacher, personal students of

Sunday, November 17, 2019

Cult of Hera Essay Example for Free

Cult of Hera Essay Cult of Hera Olympia Hera, queen of the gods, also known as the goddess of the sky, women, and marriage. She has many cults in Greece and is highly worshipped. I am going to focus on her oldest cult, which resides in Olympia. The cult was constructed around 600 BC, in fact it is the oldest temple in Greece. The style of the temple is peripteral hexastyle with six columns on the front and back and sixteen on both sides comprising pronaos, calla and optistodomos. The columns are a little over 15 feet. Originally these columns were made of wood and were gradually replaced by stone. The temple was thought in earlier times to have been dedicated to Zeus and Hera. When the temple of Zeus was completed it was officially only the cult of Hera. There is still an image of Zeus in her temple. In the cella there is Hera seated on a throne and Zeus is standing beside her wearing a beard and an helmet on his head. Only the head of Hera remains. There is also an image of Athena with an helmet on her head as ell as Zeus, carrying a spear and shield. The image of Hesperides was removed out the cult by the Eleans. The people of Megara built a treasury and dedicated offerings in it. The offerings were cedar white figurines inlaid with gold, represented Herakles fight with Acheloos. Other items important to the ancient Greek, such as, Iphitus bronze disk and a carved ivory chest hidden by cypselos, were believe to have been stored in the temple. In later years the cult housed the famous Hermes of Praxiteles. The cult stood for almost a thousand years, until about 300 A. D. References JSTOR: The annual of the British school, Vol. 90 Gate to Greece: Guide to Greece: Peloponnese: Olympia Temple of Hera Heraion Cult of Hera 1: Ancient Greek religion

Friday, November 15, 2019

Bush on Cloning :: essays research papers

Human cloning is the laboratory production of individuals who are genetically identical to another human being. Cloning is achieved by putting the genetic material from a donor into a woman's egg, which has had its nucleus removed. As a result, the new or cloned embryo is an identical copy of only the donor. Human cloning has moved from science fiction into science. One biotech company has already began producing embryonic human clones for research purposes. Chinese scientists have derived stem cells from cloned embryos created by combining human DNA and rabbit eggs. Others have announced plans to produce cloned children, despite the fact that laboratory cloning of animals has lead to spontaneous abortions and terrible, terrible abnormalities. Human cloning is deeply troubling to me, and to most Americans. Life is a creation, not a commodity. (Applause.) Our children are gifts to be loved and protected, not products to be designed and manufactured. Allowing cloning would be taking a significant step toward a society in which human beings are grown for spare body parts, and children are engineered to custom specifications; and that's not acceptable. In the current debate over human cloning, two terms are being used: reproductive cloning and research cloning. Reproductive cloning involves creating a cloned embryo and implanting it into a woman with the goal of creating a child. Fortunately, nearly every American agrees that this practice should be banned. Research cloning, on the other hand, involves the creation of cloned human embryos which are then destroyed to derive stem cells. I believe all human cloning is wrong, and both forms of cloning ought to be banned, for the following reasons. First, anything other than a total ban on human cloning would be unethical. Research cloning would contradict the most fundamental principle of medical ethics, that no human life should be exploited or extinguished for the benefit of another. (Applause.) Yet a law permitting research cloning, while forbidding the birth of a cloned child, would require the destruction of nascent human life. Secondly, anything other than a total ban on human cloning would be virtually impossible to enforce. Cloned human embryos created for research would be widely available in laboratories and embryo farms. Once cloned embryos were available, implantation would take place. Even the tightest regulations and strict policing would not prevent or detect the birth of cloned babies. Third, the benefits of research cloning are highly speculative.

Tuesday, November 12, 2019

My Dream School

General Certificate of Secondary Education June 2007 ENGLISH (SPECIFICATION A) 3702/2F Paper 2 Foundation Tier Thursday 7 June 2007 1. 30 pm to 3. 00 pm Time allowed: 1 hour 30 minutes Instructions ! Use blue or black ink or ball-point pen. ! Write the information required on the front of your answer book. The Examining Body for this paper is AQA. The Paper Reference is 3702/2F. ! Answer two questions. ! Answer one question from Section A. Answer one question from Section B. ! For Section A, you must have a copy of the AQA Anthology labelled 2005 onwards in the examination room.Section 1 of the Anthology must not contain any annotations. ! Write your answers in the answer book provided. ! Do all rough work in your answer book. Cross through any work you do not want to be marked. ! You must not use a dictionary. Information ! The maximum mark for this paper is 54. ! The marks for questions are shown in brackets. ! You are reminded of the need for good English and clear presentation in your answers. All questions should be answered in continuous prose. Advice You are advised to spend about 45 minutes on each sectionThis section relates to Section 1 of the AQA Anthology labelled 2005 onwards that you have been using during the course. Answer one question from this section on the poems you have studied in Section 1 of the Anthology: Poems from Different Cultures (pages 5-18). You are advised to spend about 45 minutes on this section. EITHER 1 Compare the methods Denise Levertov uses to present a particular culture in eWhat Were They Like? i (page 11) with the methods another poet uses to present a culture or cultures in one other poem from the Poems from Different Cultures.Write about: ! the cultures in the two poems the methods the poets use to present them ! how those methods are similar ! how those methods are different ! which poem you prefer and why. (27 marks) OR 2 How does Sujata Bhatt show that identity (who you are) is important in efrom Search For My Tong uei (page 12)? Compare the methods she uses with the methods another poet uses to show that identity is important in one other poem from the Poems from Different Cultures. Write about: ! identity in the two poems ! why identity is important in the poems ! the methods each poet uses to present identity and its importance. (27 marks) SECTION B: WRITING TO INFORM, EXPLAIN OR DESCRIBEAnswer one question in this section. You are advised to spend about 45 minutes on this section. EITHER 3 Many people are interested in animals. Write an informative article on an animal or animals of your choice. Remember to: ! write an article ! choose language to inform about the animal or animals. (27 marks) OR 4 Teenagers are often criticised in newspapers. Write a letter to the editor of a national newspaper explaining why this is often unfair. Remember to: ! explain what sort of things teenagers are often criticised for ! focus on why it might be unfair to criticise teenagers ! use letter form use lan guage to explain ! use language suitable for a national newspaper. (27 marks) OR 5 Describe your home.Remember to: ! think about what makes a home ! describe the sorts of things which make somewhere a home ! choose language suitable for describing your home. (27 marks) OR 6 Childhood memories can be very important. Choose one childhood memory. Describe the memory and explain its importance to you. Remember to: ! choose a childhood memory ! describe it in detail ! explain why the memory is important to you ! choose language to describe and to explain. (27 marks) END OF QUESTIONS My Dream School My dream school Monday, April 22, 2013 A Dream School in My Mind Have you ever thought about why you are going to school? Or have you ever talked to yourself: â€Å"Oh my God, it’s school time again. † The environment keeps changing all the time. We change houses, jobs, friends and schools. We might often ask ourselves a question: Is there any dream places where we would like to stay? If you have a chance to create a dream school, what is your dream school going to be? In my mind, a dream school is not a place that only teaches students basic knowledge. It should be a place where students can apply the skills they learn.Let’s talk about my schooling experience first. I studied at elementary school for six years, middle school and high school for six year, and university for four years. Under the traditional pattern of education, I realized that in addition to the knowledge from books, I did not get anything during my whole school life. We were taught to follow th e teacher and school’s instructions. We could not have our own ideas and had to face never-ending homework. I hated chemistry and physics. I didn’t understand why I needed to study these two subjects. The only thing I could do was memorized the formula and do the exercises again and again.I thought these subjects would not relate to my future job. This has proved to be true. I cannot remember most of the subjects that I learned in school when I graduated from high school. After college in China, I told myself that I would never go to school again. After the sixteen years of school experience, I was extremely tired. I also imagine my dream school. If I could design my dream school, it probably should be a studio school. What is a studio school? The studio school is the kind of school which breaks away from the traditional education system. The original idea of a studio was from the Renaissance.People learn their skills by working. In the Chinese language, two characters represent the word â€Å"learning†. The first character means to study. The second character means to practice constantly. Studying and practicing are put together. It suggests that learning should mean self-improvement. This comprehension is confirmed by the studio school. There are two main aspects in a studio school. First, students who study in a studio school will be much more motivated and excited than in traditional education. A large number of teenagers are dropping out of school because they are bored in the traditional education system.They don’t like to attend school. They can’t see any relationship between what they learn in school and their future job. On the other hand, employers complain that the students are not actually ready for real jobs. They didn’t have any experiences or the right attitude. Studio school can solve this problem. Every student can attend this kind of studio school. There is no extra cost and no selection. This school allows the students the route into university. The most important part is that most of the curriculum is done not through sitting in a classroom. No grades or competition exists in school. Every class has their own field.One class may focus on creative and media industries, while other ones have a focus on health care, engineering and other fields. Students would decide the specific subject that they like to study. Second, this school puts things like working in teams, and doing practical projects at the heart of learning, rather than on the edges. Students learn best by doing things and learn best in teams. In the studio school, students do the practical projects and work on commission for businesses. Every student would have a coach, as well as a teacher who would have a timetable much more like a work environment in a business.And all of projects will be done within the public system. Students do a lot of real projects in order to prepare much better for real life work today. Sch ool life is one of the most important parts of our life. We spend at almost a quarter of our life in school. The ideas of studio school correspond to the character â€Å"learning† in the Chinese language. We are not only to study, but also to practice. As long as we combine study and practice, learning would be a fulfilling, exciting experience, and students wouldn’t have to dread school. — college student